In Part 3, I had the opportunity to experience the Kingroon KP3S Pro S1 firsthand.

Share this story

Our Take on the Kingroon KP3S Pro S1: Print Results and Final Thoughts

Welcome back to our review of the Kingroon KP3S Pro S1 3D printer. If you haven’t already, make sure to read parts one and two of our review. In this final installment, we will share our findings on the print results and give our overall thoughts on the printer.

After encountering some stringing issues with the yellow filament during our initial tests, we reached out to Kingroon for assistance. They suggested running a few additional tests and concluded that the fault was with the filament roll, not the printer itself. In addition, they provided us with customized filament profiles for PETG, TPU, and PLA, which greatly optimized our prints. We believe it would be beneficial for Kingroon to include these profiles on the SD cards that come with their equipment in the future.

With fresh PLA filament and the custom profile, our test prints went much more smoothly, with minimal stringing. The calibration cube had slight ringing, but overall, the print quality was impressive. Our #3DBenchy print was exceptional, capturing even the stern text clearly, which is often a challenge. The Knurling Nut & Bolt print turned out impressive, with the parts spinning together effortlessly. We did encounter a minor hiccup with our Cylindricity Test due to a slicing error, but it was quickly fixed, and the parts fit perfectly. The print-in-place designs, such as the Planetary Gears and PIP Spring Loaded Box, worked flawlessly after some gentle nudging. Our Voronoi-style Lamp_3 was a complete success.

When it came to printing vases in vase mode, we decided to revisit the yellow PLA filament. Vase mode’s properties minimized the retraction-related issues, resulting in spectacular prints. The Spiral, Low-pot-poly, and Hexagon vases all turned out beautifully with fantastic surface finishes.

We also ventured into new terrain by testing flexible TPU filament. We attempted to print a replacement wheel for a vintage RC car, and the printer handled the flexible filament with ease. The resulting wheel was a perfect fit and fully operational. Removing the support structures was fun, but a bit time-consuming.

Although the KP3S Pro S1 is not explicitly advertised as supporting ABS material, we decided to give it a try. By adjusting the nozzle and bed temperatures and creating a new ABS profile based on the PETG profile, we were able to successfully print a Carabiner and a Bottle Opener Whistle. To counter ABS’s tendency to warp on open-air printers, we added substantial brims, which greatly improved the prints’ quality. The final ABS prints exceeded our expectations.

Moving on to the packaging and assembly experience, we found the KP3S Pro S1’s shipping packaging to be robust. However, adding a few zip ties to secure the main components during extraction from the box could have enhanced the unboxing experience. The assembly process was straightforward, although we believe the build instructions and slicer setup could have been clearer. Filament loading was simple but entirely manual. Including an automated loading/unloading routine would have been a welcome addition.

We did encounter a skewed X-axis beam issue, but it was quickly resolved. It would be beneficial for Kingroon to include instructions for this repair in future manuals. Throughout our testing, we didn’t face significant Z-gap issues thanks to the initial leveling process. However, a firmware-based setting for more complex prints would have been helpful.

In conclusion, despite a few minor challenges addressed during our review, the KP3S Pro S1 delivered reliable, high-quality prints with decent dimensional accuracy. It performed admirably with PLA, PETG, and TPU, and even showed some success with ABS in our exploratory tests. The support from Kingroon was impeccable, as always.

Despite its limited build volume, the printer’s compact form factor makes it an ideal choice for hobbyists looking to explore 3D printing without requiring extensive space. Kingroon has done an excellent job with the KP3S Pro S1, and we look forward to seeing what they come up with next.

Thank you for following along with our three-part review of the Kingroon KP3S Pro S1. We hope you found it informative and helpful in making your printer buying decision.

– Beginner Rating: 6/10

– Enthusiast Rating: 9/10

– Production Rating: 7/10

This is part three of a three-part series. If you missed parts one and two, make sure to check them out.

🔧 Kingroon: The Perfect Solution for Your 3D Printing Needs! 🔧

Are you tired of struggling with unreliable 3D printers that produce lackluster results? Look no further! Kingroon is here to revolutionize your printing experience with its top-notch features. In this blog post, we will discuss three key aspects that set Kingroon apart from its competitors: reliable support, exceptional print quality, and quick assembly.

####✔ī¸Ž Reliable Support

One of the most frustrating experiences as a 3D printing enthusiast is encountering difficulties and not having reliable support to turn to. Kingroon understands this concern and is committed to providing exceptional customer service. With prompt responses and expert advice, their support team is always ready to assist you in resolving any issues that may arise during your printing journey. Say goodbye to endless frustration and hello to a hassle-free printing experience with Kingroon!

####✔ī¸Ž Print Quality

Another essential factor to consider when choosing a 3D printer is the quality of the prints it produces. With Kingroon, you can rest assured that your designs will come to life with astonishing precision and detail. The printer’s advanced features and cutting-edge technology ensure that every layer is accurately laid down, resulting in stunning, professional-looking prints. Whether you’re creating prototypes or intricate models, Kingroon guarantees a flawless result every time.

####✔ī¸Ž Quick Assembly

Gone are the days when hours of painstaking effort and frustration were required to assemble a 3D printer. Kingroon understands the value of your time and has designed their printers for quick and easy assembly. With clear instructions and intelligently organized parts, you can have your printer up and running in no time. Say goodbye to tedious hours spent deciphering vague instructions and hello to a hassle-free setup process with Kingroon!

However, it is important to note that no product is perfect, and Kingroon has areas where it can improve. Here are a few aspects that some users have identified as potential drawbacks:

####✖ī¸Ž Vague Instructions

While Kingroon excels in many areas, a few users have mentioned that the provided instructions can sometimes be vague or unclear. This may pose a challenge, especially for beginners who are new to 3D printing. However, the reliable customer support we previously mentioned is ready to assist you in navigating any confusion you may encounter.

####✖ī¸Ž Manual Load/Unload

Unlike some of its competitors, Kingroon’s printers currently require manual load and unload of filaments. While this may not be a significant issue for experienced users, it can be a minor inconvenience for those who prefer a more automated process. However, this small drawback is outweighed by the printer’s many other impressive features.

####✖ī¸Ž Live Z-gap Adjust

Another area for improvement is the lack of live Z-gap adjustment in Kingroon’s printers. While the printer performs exceptionally well in terms of print quality, having a live Z-gap adjustment feature would further enhance its capabilities. This would allow users to fine-tune the bed leveling during the printing process, resulting in even more precise prints.

In conclusion, Kingroon offers a reliable and high-quality 3D printing solution, with exceptional customer support, excellent print quality, and fast assembly. While there are a few areas where Kingroon could improve, it is important to note that these minor drawbacks are far outweighed by the printer’s many outstanding features. If you are searching for a printer that combines reliability, precision, and ease of assembly, Kingroon is the perfect choice for you!

So why wait? Embrace the future of 3D printing with Kingroon and unlock a world of limitless possibilities!

✨ Share this post to let others know about the fantastic features Kingroon has to offer! ✨

Original source


Share this story

Leave a Reply

Your email address will not be published. Required fields are marked *