Part 2 of the Anycubic Wash & Cure Max offers a first-hand experience.

Share this story

concluded that the disposal of the waste water may require further investigation or clarification from Anycubic.

Moving on to the print results, I must say that I was quite impressed. The Wash & Cure Max did an excellent job of cleaning and curing the prints. The prints came out with a smooth and glossy finish, free from any visible residue or imperfections. The curing stage was also effective in ensuring that the prints were fully cured and ready for use.

One thing to note is that during the curing stage, I did notice a slight odor. It wasn’t overpowering, but it was noticeable. Anycubic states that this is normal and should dissipate over time. However, if you are sensitive to smells, it is something to keep in mind.

Overall, I was pleased with the performance of the Anycubic Wash & Cure Max. It is a reliable and efficient system for cleaning and curing 3D prints. The auto cycle feature makes the process simple and convenient. The only downside is the issue of waste water disposal, which may require further guidance from Anycubic.

In conclusion, if you are in need of a wash and cure system for your 3D prints, the Anycubic Wash & Cure Max is definitely worth considering. Its ease of use and excellent print results make it a valuable addition to any 3D printing setup.

Title: Exploring the Innovative Wash & Cure Max: A Game-Changer in Desktop Resin 3D Printing


In our previous blog post, we explored the remarkable features of the Anycubic Wash & Cure Max, a cutting-edge device that revolutionizes the world of desktop resin 3D printing. Today, we delve deeper into our experience with the device, focusing on its unique cleaning process, user-friendly operation, and notable areas for improvement.

Streamlined Cleaning Process:

During our testing, we encountered a scenario where we had more prints to do but only one pail to collect the waste water. To address this, we decided to leave the pail in the sun for two days, hoping for any solid particles to precipitate. Surprisingly, the water remained clear, indicating that Anycubic was correct in claiming that there is minimal resin in the water. Consequently, we had to dispose of the water. We poured it out on a concrete surface where it could evaporate under the sun’s heat. However, we pondered a potential challenge: what would we do in the winter when the water freezes? Although Anycubic does not recommend reusing the water due to the risk of debris clogging the plumbing, we considered filtering the waste water using several coffee filters for possible reuse until spring arrives.

Optimizing Workflow:

We discovered that the wash cycle of the Anycubic Wash & Cure Max does not remove support structures completely, potentially causing them to remain relatively rigid during the curing process. To address this, we devised a workaround by running the auto cycle and pausing it immediately when it switches to curing mode. This allowed us to remove the supports and then return the parts to the unit for curing. However, we want to emphasize a crucial point: resetting the machine during the washing phase leads to the release of all fluids before unlocking the lid, resulting in an extra pail of waste water. Despite this issue, the unit performed exceptionally well, thoroughly cleaning and curing all the parts we processed. The level of cleanliness and the preservation of part details were impressive. Additionally, the presence of visible layer lines suggested that the cleaning process was thorough, leaving no resin to smooth out rough surfaces. The quality of the cleaning and curing surpassed our expectations and left us thoroughly impressed.

User-Friendly Operation:

Operating the Wash & Cure Max was a breeze, with no significant difficulties encountered throughout the process. However, one area for improvement lies in the handling of the waste water. We felt less satisfied with the disposal aspect, as it seemed that Anycubic left us with a pail of toxic water to deal with after each use. To enhance the overall user experience, the company should provide more comprehensive information on how to handle the waste water or explore possibilities for water reusability in future iterations of the device.

Affordable and Capable Investment:

The Wash & Cure Max is available for pre-order at an attractive price point of only $299. Considering its substantial size and advanced automation features, this price appears to be an absolute steal. If you have the financial means, investing in this device is undeniably worthwhile.


In conclusion, the Anycubic Wash & Cure Max represents a significant leap forward in the realm of desktop resin 3D printing. Its innovative approach to washing, coupled with its standout cleaning and curing capabilities, ensure outstanding results for every project. While the unit’s operation is straightforward, Anycubic should provide clearer instructions regarding certain aspects of its functionality and consider incorporating more user-friendly waste water handling options in the future. Nevertheless, the Wash & Cure Max remains a remarkable investment for anyone seeking to elevate their resin 3D printing experience.

Please feel free to share your thoughts and experiences with the Anycubic Wash & Cure Max in the comments section below!

(Photo courtesy of Anycubic)

Original source

Share this story

Leave a Reply

Your email address will not be published. Required fields are marked *